Blackstone won’t light- How to Fix?

by Dana Woods
Updated on

If you have a Blackstone stove and it won’t light, there are a few things you can try before you call a professional. First, check to make sure there is gas in the tank, make sure that you are using the correct type of fuel – Blackstone recommend using either propane or butane. If you are using the correct fuel and your griddle still won’t light, check to see if the igniter is working. If the igniter isn’t working, you will need to replace it. 

If the tank is empty, you will need to refill it before you can use the stove. If the tank is full, try lighting the stove with a match. If the match doesn’t light, there may be something blocking the flow of gas. Check the connections to make sure they are tight. If they are loose, tighten them. If that doesn’t work, you may need to replace the regulator.

There is also a possibility that the gas valve is not open. This can be caused by a variety of things, such as a faulty gas valve, a dirty gas valve, or a blockage in the gas line. If you have checked these things and the griddle still will not light, then you may need to call a professional.

Reasons why your Blackstone won’t light

Wiring issues

The reason could be due to wiring issues. If the wiring is not set up correctly, then the electricity will not be able to flow through and light up the Blackstone. It could be that Blackstone is not getting enough power. If the power supply is not strong enough, then the Blackstone will not be able to light up. 

Check to make sure that all of the connections are tight and secure. If they are loose, tighten them up and see if that solves the problem. If not, then it is likely that there is a break in one of the wires. This can be tricky to find, but if you follow the wires from the power source to the light, you should be able to find where the break is. Once you find it, you can either splice the wires back together or replace the entire section of wire.

Piezo Ignitor Valve issues

One of the most common problems with the Blackstone griddle is lighting issues. This is often caused by an issue with the piezo ignitor valve. The piezo ignitor valve is responsible for providing the spark that lights the griddle. If this valve is not working properly, it can cause the griddle to have difficulty lighting. 

There are a few things that can cause the piezo ignitor valve to stop working properly. One of the most common issues is that the valve can become clogged with grease and other debris. This can happen over time as the griddle is used. If the valve becomes clogged, it will not be able to provide the spark that is needed to light the griddle.

Not receiving enough power

One potential cause of lighting problems in the Blackstone griddle is not receiving enough power. This can happen if the griddle is not plugged in correctly, or if the power outlet is not working properly.

Another potential cause of lighting problems is a faulty light bulb. If the light bulb is not screwed in correctly, or if it is damaged, it will not work properly.

Battery Issues

The Blackstone griddle is a popular kitchen appliance that uses electricity to cook food. However, some users have reported issues with the battery life of the griddle, which can cause problems with the lighting. The battery in the griddle is used to power the heating elements, as well as the LED lights that indicate when the griddle is on and when it is preheating. 

If the battery is not working properly, the griddle may not heat up properly, and the lights may not work correctly. This can be frustrating for users, as it can make it difficult to tell when the griddle is ready to use. Additionally, the griddle may not cook food evenly if the battery is not working correctly. 

Some users have found that the battery life of the griddle can be improved by using it regularly, as this can help to keep the battery charged. Additionally, it is important to make sure that the griddle is turned off when it is not in use, as this can also help to extend the life of the battery.

Troubleshooting the problems of Blackstone lighting

Fixing the wiring

There are a few things to consider when troubleshooting the wiring issues if the Blackstone won’t light. First, check the power source to make sure that it is working properly. 

Next, check the connections between the Blackstone and the power source to make sure that they are secure. 

Finally, check Blackstone itself to make sure that there is no damage that could be causing the problem. If the Blackstone still will not light after taking these steps, it may need to be replaced.

Fix Piezo Ignitor Valve issues

If you are having trouble lighting your Blackstone with a piezo ignitor valve, there are a few things you can try to fix the issue. First, make sure that the gas valve is in the “open” position. 

Then, check that the ignitor valve is clean and free of debris. If it’s dirty, you can try cleaning it with a wire brush. Finally, if the ignitor valve is still not working, you may need to replace it.

Fixing battery issues

One of the most common issues with Blackstone griddles is battery problems. This can be caused by a number of things, but the most common culprit is simply a dead battery. If your Blackstone griddle won’t turn on, the first thing you should check is the battery. 

If it is dead, simply replace it with a new one and your griddle should work as good as new. Another common issue that can cause battery problems is a dirty or corroded battery terminal. 

If this is the case, simply clean the terminal with a wire brush or a piece of sandpaper. Once the terminal is clean, you should be able to get your griddle working again.


If you are having trouble getting your Blackstone griddle to light, there could be a few different things going on. Make sure you have fresh propane, that your burners are turned on, and that you are using the igniter button correctly. If those things all check out, then it’s possible you need a new igniter button. You can order one from Blackstone or from a third-party retailer.

Photo of author

About the author

Dana Woods

Hi! I am Dana founder of PBandJamsPHL. I am a foodie at heart who loves to try out different restaurants, cuisines and recipes. I have been working in the food and restaurant industry for over 10 years now and started PBandJamsPHL to provide the best information related to food on the web.

Leave a Comment